N the restrictions in the placement of your sensor and the instability within the offered outcomes, it was proven that our process shows considerable enhancements inside the reliability with the detection with the measured motor’s rotation-direction. To conduct the presented measurements, an experimental measurement station was setup, using a 6DOF robotic arm UR10e from Universal Robots. The measurement station was presented as an example of using an available robotic arm for specialized measurement. The whole setup, such as added electronics and handle script, was presented. In line with Figure 9, it appears that our presented method must offer trusted final results inside a larger region than the a single defined for the compared industrial sensor. It might also be attainable to additional enlarge the appropriate area drastically. Improving the functionality and robustness from the system within the complete region about the measured motor is going to be the object of follow-up analysis. Additionally, preliminary final results suggestMachines 2021, 9,12 ofthat there may exist a related approach for EC motors, that will also be addressed in our future function. Further research could also be directed in applying comparable non-invasive approaches for detecting other varieties of faults, e.g., faulty bearings, other forms of motor winding defects, etc. A side benefit of this experimental paper will be the measurements with the stray magnetic field about a real DC motor, which can serve as a basis for further investigation into other design and diagnostic techniques.Author Contributions: Conceptualization, M.M. and R.G.; methodology, M.B. and M.A.; software program, M.M.; validation, M.A., M.M. and R.G.; formal analysis, R.G. and M.A.; investigation, M.M. and M.B.; information curation, M.A.; writing–original draft preparation, M.M. and M.B.; writing–review and editing, M.B., M.M., and R.G.; visualization, M.A.; supervision, R.G.; project administration, M.B. and R.G.; funding acquisition, R.G. All authors have read and agreed to the published version of the manuscript. Funding: This research was funded by the Faculty of Mechanical Engineering, Brno University of Technologies beneath the project D-Fructose-6-phosphate disodium salt web FSI-S-20-6407 “Research and improvement of strategies for simulation, modelling a machine finding out in mechatronics”. Institutional Overview Board Statement: Not applicable. Informed Consent Statement: Not applicable. Information Infigratinib Biological Activity Availability Statement: For the experimental data please contact the corresponding author M.M. by way of [email protected]. Conflicts of Interest: The authors declare no conflict of interest.machinesArticleStraw/Spring Teeth Interaction Analysis of Baler Picker in Sensible Agriculture through an ADAMS-DEM Coupled Simulation MethodQingqing Wang 1,2 , Ziwen Bai 1 , Zhiqiang Li 1 , Dongbo Xie 1 , Liqing Chen 1,two, and Hai Wang 1,three, College of Engineering, Anhui Agricultural University, Hefei 230036, China; [email protected] (Q.W.); [email protected] (Z.B.); [email protected] (Z.L.); [email protected] (D.X.) Anhui Province Engineering Laboratory of Intelligent Agricultural Machinery and Equipment, Hefei 230036, China Discipline of Engineering and Power, Murdoch University, Perth, WA 6150, Australia Correspondence: [email protected] (L.C.); [email protected] (H.W.)Abstract: Within this paper, a new coupling simulation technique is proposed for baler picker applying automatic dynamic analysis of mechanical systems (ADAMS) and discrete element strategy (DEM). Field tests are carried out to confirm the accu.